How to Install Tandem Axles on a Trailer?

Tandem or double axle trailers, built for heavy loads, are typically supported by a leaf spring suspension system. Two leaf springs, in tandem, are connected across an equalizer bar on either side of the trailer. The equalizer bar distributes weight evenly across adjacent springs, protecting the axles from a disproportionate load weight. 

Your new axles will be protected from undue wear and tear with a properly installed leaf spring system. The followings are the specific steps for installing tandem axles.

(1) Raise the four corners of the trailer on blocks.

(2) Fasten the center hole of each equalizer bar to the middle hanger on either side of the trailer using spring bolts and a socket wrench.

(3) Bolt leaf springs to either side of each equalizer bar using spring bolts and a socket wrench. A leaf spring eye bolt bushing end attaches to a side hole on the equalizer.

(4) Set the front axle across the centers of the two front leaf springs. Lifting one leaf spring at a time, fasten the free end of each leaf spring to the front hanger bracket using a spring bolt and a socket wrench. The axle should be suspended across the front leaf springs.

(5) Fasten the front axle to the front leaf springs using a U-bolt, retainer bracket, and a socket wrench. Make sure each end of the axle is sitting in a center leaf spring seat.

(6) Set the rear axle across the centers of the two rear leaf springs. Lifting one spring at a time, fasten the free end of each leaf spring to the rear hanger bracket using a spring bolt and a socket wrench. The rear axle should be suspended across the rear leaf springs.

(7) Fasten the rear axle to the rear leaf springs with a U-bolt and retainer bracket, using a socket wrench. The rear axle should be seated at the center of each leaf spring.

(8) Tighten all the bolts to the manufacturer's torque specifications, using a torque wrench. Remove the blocks, and lower the trailer.

After completing the installation of the tandem axle, we need to check whether the installation position of the axle is correct because this determines whether the trailer can remain stable during driving. If you want to know more about trailer axles after reading the above, you can contact us for professional and comprehensive solutions. At the same time, the trailer axle we design and produce is stable and durable, which can meet your actual needs.

As a professional manufacturer of trailer parts, we have accumulated decades of manufacturing experience in this field. We have a strict production team and a complete management system, which can provide you with safe and high-quality products. At the same time, we will also provide thoughtful services and effective solutions according to your needs. If you are interested in our trailer axles, please contact us immediately!